Burbank / Doors & Windows
Glass. Frames. Hardware.
Know which part needs work.
Separate the visible symptom from the proposed repair. Read about the components, compare the scope and keep replacement options tied to the condition of your opening.
Clearer on the work.
THE WORK, UP CLOSE
Every service has a story. Start with yours.
Window Replacement
Full-Frame Window Replacement
Water is staining the wall around the window, the trim feels soft, or the old frame looks too damaged to keep.
Explore the work ↗
Window & Glass Repair
Foggy Dual-Pane Glass Replacement
Fog is trapped between the panes and will not wipe off from either side.
Explore the work ↗
Doors
Sliding Patio Door Installation
The patio door leaks at the sill, feels loose in the opening or is difficult to move, and I want to compare repair with replacement.
Explore the work ↗
Glass & Performance
Double-Pane, Triple-Pane & Low-E Upgrades
The glass feels icy on cool mornings, sunny rooms overheat, and furniture is fading near the windows.
Explore the work ↗AN ORIGINAL MOTION STUDY
See what moves. Know what to ask.
A sticking panel, failed glass unit and worn frame are different problems. Start with the opening that needs attention, then compare a targeted repair with replacement based on its condition.
Explore the service guides ↗The equipment file
See the components. Ask better questions.
EXPLORE THE SERVICE CATALOG
The details make the difference.
Window Replacement
Full-Frame Window Replacement
Water is staining the wall around the window, the trim feels soft, or the old frame looks too damaged to keep.
Explore the service →Window & Glass Repair
Foggy Dual-Pane Glass Replacement
Fog is trapped between the panes and will not wipe off from either side.
Explore the service →Doors
Sliding Patio Door Installation
The patio door leaks at the sill, feels loose in the opening or is difficult to move, and I want to compare repair with replacement.
Explore the service →Glass & Performance
Double-Pane, Triple-Pane & Low-E Upgrades
The glass feels icy on cool mornings, sunny rooms overheat, and furniture is fading near the windows.
Explore the service →
Window Replacement
Insert / Retrofit Window Replacement
The windows are drafty and dated, but the frames and surrounding stucco still look solid and I want less disruption.
Explore the service →
Window & Glass Repair
Broken Window Glass Replacement
A pane is cracked through, has a hole in it, or is dropping sharp pieces onto the sill.
Explore the service →
Doors
French Door Installation
The pair of patio doors has daylight between the panels, rubs at the top, or no longer closes as one even set.
Explore the service →
Glass & Performance
Tempered & Laminated Safety Glass
A low window, bathroom pane, or glass beside a door looks dangerously easy to fall into.
Explore the service →
Window Replacement
Single Window Replacement
One window is cracked, leaking, or impossible to use while the rest of the house is still fine.
Explore the service →
Window & Glass Repair
Window Sash & Balance Repair
The window slams shut, will not stay open, or one corner of the sash sits lower than the other.
Explore the service →
Doors
Multi-Slide & Bi-Fold Glass Wall Installation
I want the living room to open almost completely to the patio instead of looking through one ordinary doorway.
Explore the service →
Glass & Performance
Noise-Reduction Window Glazing
Traffic, aircraft, or late-night conversations sound almost as loud with the windows closed as they do outside.
Explore the service →TAKE A CLOSER LOOK
The equipment behind the everyday.
Illustrative service photography; not a portfolio of completed customer jobs.
EXPLORE THE AREA
Burbank
Loads Google Maps when selected.
Place reference only. Confirm service availability for your exact address.
START WITH YOUR ADDRESS
Burbank. Your property. Your questions.
Planning your work
The US Census Bureau’s 2020 place-code file for California lists Burbank in Santa Clara County as a census-designated place rather than an incorporated place. A census-designated place is a named settlement, not a city with its own charter, so the building department that serves an address here is not something to assume from the area name. Establish which authority issues the permit for your address before scheduling work, and ask the provider to confirm it in writing. This record identifies a place type; it does not name the permitting authority for any individual property or decide which permits a project needs.
Read the local reference ↗Local context
The US Consumer Product Safety Commission’s window-fall guidance says never to depend on screens to keep children from falling out of windows, and suggests window guards, or window stops so that a window opens no more than 4 inches. It matters when you change how a window opens or replace hardware or screens. Raise it with the provider if young children use the room, and ask how any guard or stop interacts with escape and rescue openings. This is national safety guidance, not a compliance finding for your property.
Read the local reference ↗BEFORE YOU AGREE
Look for clear answers.
Can a difficult sliding door be repaired without replacing the frame?
A sticking panel can involve rollers, track damage, alignment or worn seals. Ask which condition was observed and whether compatible parts are available. A sound frame may remain in place for a targeted repair; deterioration at the sill or frame can change that scope. Compare the actual findings before choosing a complete replacement.
Does fog between panes mean the whole window needs replacement?
Moisture between the panes is different from condensation on a room-facing surface. A proposal may replace the sealed glass unit while retaining a suitable sash and frame. Ask which component has failed, how the replacement glass is specified and whether the existing frame can support the work.
How do insert and full-frame window replacement differ?
An insert retains a suitable existing frame and places a replacement unit within it. Full-frame work removes more of the assembly and exposes the opening for assessment. Compare retained materials, flashing work, trim restoration and the resulting clear opening rather than treating both proposals as the same job.
What should I compare on a window performance label?
Compare the ratings for the complete product and its suitability for the local climate and project. U-factor and solar heat gain coefficient describe different aspects of performance. Ask which specified unit the label describes; a generic brochure does not establish the rating of the product being supplied.
What information helps prepare a door or window visit?
Describe the opening, how it moves and what changed. Note whether a concern is with glass, the moving panel, hardware or the surrounding wall. If available, gather product labels, earlier invoices and photographs taken without dismantling the assembly. Explain access restrictions and keep people away from broken glass.
What should the written scope include?
Ask which units and components are included, what remains in place, how access and removal are handled, and who restores affected finishes. Confirm product specifications, disposal, weatherproofing and completion checks. Any concealed damage discovered during the work needs an explained change to the agreed scope.
READ THE DETAILS
A better conversation starts here.
BEFORE THE VISIT
Choose the right service
Ask about rollers, track condition and alignment. Difficulty moving does not identify a failed part by itself.
Read the guide →BEFORE THE VISIT
Prepare for the visit
Identify the affected opening and describe the symptom. Gather available product labels and previous work records. Explain access restrictions and keep the opening clear.
Read the guide →BEFORE THE VISIT
Understand your quote
Glass-only, hardware-only and complete-frame work involve different materials and labor. Compare proposals for the same work.
Read the guide →EXPLORE THE PHOTOGRAPHS
Photo gallery
Doors or windows?
Tell us what needs work and we will call you back.